Home / Knitting / Dasha doll with outfits Knitted toys

Dasha doll with outfits Knitted toys

The height of the doll is about 32 cm.
You can hug this kind, soft doll, play with it, dress it in different clothes

Necessary materials:
– yarn “Lydia” (100% wool) pink – 80 g;
– 2 buttons of blue color for eyes;
– red button for the mouth;
– yarn “Souffle” (100% acrylic) yellow for making hair – 70 g;
– yarn “Feinperle” (100% acrylic) blue for panties – 5 g;
– a piece of cardboard 8x8cm in size for the soles;
– cotton wool or synthetic winterizer for stuffing products;
– a set of five knitting needles for circular knitting No. 2;
– knitting hook.

knitted doll

 

We knit a doll Dasha

All details of pink color are knitted with a thread in six additions.

how to tie a doll

Head. With a pink thread in six additions, knit 36 ​​loops on the knitting needles, distribute them on four knitting needles (nine loops each) and, noting the beginning of the first knitting needle, knit the first row in a circle with facial loops. Then in the 3rd, 5th and 7th rows add one loop at the beginning and at the end of each knitting needle, knitting as follows: knit one facial loop, pull an additional loop from the bottom row, knit the rest of the stitches with the front ones, without knitting to end of one loop, pull another additional loop from the bottom row, the last loop is the front. On the needles of 15 loops. From the 8th to the 30th row, knit with facial loops in a circle, without changing the number of loops. Now start reducing the loops. In the 31st, 33rd, 34th, 36th and 38th rows, knit two loops together at the beginning of the first and third and at the end of the second and fourth knitting needles. In the 39th row on the knitting needles of ten loops. Starting from the 41st row in each row, knit two loops together at the beginning of the first and third and at the end of the second and fourth knitting needles. Reduce until four stitches remain on the knitting needles. To make the neck, then knit 6 rows in a circle, without changing the number of loops, and in the last row close all the loops, knitting them two together. So, the open wide part is the top of the head, the lower narrow part is the neck. Determine the side where the face of the toy will be, and put a layer of cotton or sintepon. Form a ball from cotton and put it into the product. To form the nose and chin, place two small cotton balls between the knitted fabric and the cotton layer. Add small pieces of cotton wool to mark the cheeks. The head should be tightly packed. Stuff your neck. Open the top of the head to thread over the edge and tighten a little. Determine the site of sewing on the eyes and mouth. With a pink thread, make small seams at the inner corners of the eyes to make the doll’s cheeks more convex. From the outside of the mouth also lay small stitches, gently pulling the thread. Move the thread to the outer corner of the eye, flash again, slightly pulling the thread. On the other side of the face, lay the same seams-weights.

Tip. If you are not sure that you can handle the design of the head in the described way, I suggest a simplified version. Cut a piece of 15-20 cm long from an elastic stocking. On one side, collect its edges on a thread and tighten it and fasten it. In the resulting bag, start putting cotton wool as described. Control the shape of the head by tying a piece of stocking on top. When the head is formed, sew the upper part of the stocking, carefully put the stocking through the upper open part of the pink knitted fabric inside and sew. Put cotton or synthetic winterizer in the neck.

Hair. Cut the yellow thread into 80-100 segments 44 cm long. For bangs, cut 12-14 strands 17 cm long. Starting from the forehead line, evenly distribute the long threads towards the back of the head and mark them at the center of the bend of the threads. Sew the threads that make up the bangs to the line of the beginning of the parting and lay the hair on the forehead. Sew, having previously outlined the places for sewing, blue eyes-buttons and a red button-mouth. Sewing yellow hair to the head, braid it in braids. Trim bangs and braid ends. On braids, you can tie bows of bright ribbons.

Torso. With a pink thread in six additions, knit 20 stitches on the knitting needles, distribute it into four knitting needles (five stitches for each knitting needle) and, marking the beginning of the first knitting needle with a colored thread, knit the first row in a circle with the front stitches. In the 2nd row, add one loop through one loop, pulling an additional loop from the bottom row. On the needles of ten loops. In the 4th, 6th, 8th, 10th, 12th and 14th rows, add one loop at the beginning of the first and third and at the end of the second and fourth knitting needles. Add loops, knitting them as follows: for the first and third knitting needles – one front, pull an additional loop from the bottom row, the rest – front, for the second and fourth knitting needles – without knitting one loop to the end of the row, pull another additional loop from the bottom row knit the last loop. On the needles of 16 loops. From the 15th to the 30th row, knit with facial loops in a circle, without changing the number of loops. In the 31st circular row, break the pink thread, leaving an end 3-4 cm long, tie the blue thread and knit 2 rows, alternating the front and back loops.
Next, knit 26 circular rows with a blue thread and, to form the legs, divide the work into two parts. Knit all loops on the first and third knitting needles, closing the last three loops, close the first three loops on the second and fourth knitting needles. Distribute 28 stitches that make up one leg into three knitting needles (9, 9, 10 stitches) and knit 4 rows in a circle with the front stitches. Break the blue thread, tie a pink thread to the end of the blue thread and knit another 20 circular rows. Transfer 15 stitches to one knitting needle (count the stitches from the inner line of the leg) and then knit on two knitting needles with the front smoothness (face loops on the face, wrong sides on the inside). Knit 10 rows, then divide all the loops into three equal parts (two side and one central), five loops in each. Start decreasing on the front side: knit the first two parts (five side and five central loops), knit the fifth central and adjacent side loop together with the front, turn the work over and knit on the wrong side. When turning the first loop is removed not knitted. Knit the last loop of the central part and the first side loop together. Work turn over. So knit until all side loops are closed. Five central loops remain on the knitting needles. On the lateral open edges of the heel, dial five loops, distribute the obtained 28 loops into four knitting needles (seven loops for each spoke) and knit 7 rows in a circle with facial loops. Then we begin to make reductions for the design of the toe of the leg, knitting in each row two loops together at the beginning of the first and third and at the end of the second and fourth knitting needles, until one loop remains on the knitting needles. Collect the remaining loops on a thread, tighten, cut off the end of the thread and pull in with a crochet hook. Tie the other leg the same way. Cut out of the cardboard two soles. Insert a cardboard sole into each leg through the open edge of the body and start stuffing the legs over the cardboard tab. Stuffing the legs is not too tight. Insert cotton wool in small portions, pushing it in different directions with the blunt ends of scissors, knitting needles or a pencil. Smooth the surface of the product so that no lumps form. Insert, evenly distributing, cotton in the body with long stripes. Attach the upper part of the body to a pink thread and sew the head to the body with the same thread.

Hands. Both hands fit equally. With a pink thread, dial 24 loops on the knitting needles, distribute them on four knitting needles (six loops each) and knit 30 rows in a circle with facial loops. Starting from the 31st row, knit two loops together at the beginning of the first and third and at the end of the second and fourth knitting needles, until there is one loop on the knitting needles. Collect the remaining loops on the thread, pull, trim and pull the end of the thread inside with a hook. In the hands, put a little cotton and sew a few stitches with a pink thread, highlighting the fingers. From the brush up tightly fill the hand Do not fill the upper end of the hand. Sew the open part of the hand over the edge and, having determined the place for sewing on the hands, sew on the hands.

White blouse

Need yarn “Olga” (100% wool) white – about 25 g; knitting needles number 2.

white jacket knitted

Knitting. Mixed gum: 1st row – front, back, front, back, and so on. The 2nd and all subsequent rows are knitted as follows: over the front loops – wrong, over the wrong ones – facial. All details of the blouse are knitted on two knitting needles with a white thread in two additions.

Before. Dial 34 loops, knit 3 rows with front loops and, starting from the 4th row, knit 16 rows with a mixed elastic band. Then start making reductions for the formation of the armhole, knitting two loops together front at the beginning and at the end of the knitting needle in the 17th, 19th and 21st rows. Next, knit 12 rows, without changing the number of loops, and begin to make the neck. Close the six middle loops and end both sides of the front separately, while through the row close at the neckline cut one loop 2 times. In the 18th row, close all the loops to form a shoulder.

Back It fits in two parts. Collect 18 loops and knit as half of the front.

Sleeves. Collect 26 loops, knit 3 rows with facial loops and then knit 20 rows with the main viscous. For okata, close the sleeves in the 21st row with three loops on both sides, and then in the 23rd, 25th and 27th rows – two loops on both sides. In the 28th row, close the remaining three loops.
Sew all the details. The neckline can be crocheted.

Red blouse

Need yarn “Olga” (50% wool, 50% acrylic) red -30 g; knitting needles number 3.

knit a red sweater

Knitting: facial smoothness – facial loops fit along the face, wrong side along the inside. We knit on two knitting needles.

Work. Type 50 loops on the knitting needles and knit the wrong, front and wrong rows. In the next front row, knit as follows: 2 together front, double crochet, 2 together front, double crochet, and so on. Knit the wrong side, the front, the wrong side. Next, mark with colored thread, starting from the edge of the row: 3 loops (plank), 7 loops (in front), 1 loop (raglan), 6 loops (sleeve), 1 loop (raglan), 14 loops (back), 1 loop (reglan ), 6 loops (sleeve), 1 loop (raglan), 7 loops (front), 3 loops (bar) – a total of 50 loops. Knit a blouse with a raglan sleeve. The first and last three loops in each row are knit with facial. 1st row (front) – 3 front loops, 7 front, double crochet, 6 stitches (sleeve), double crochet, 1 front loop, double crochet, 14 stitches (back), double crochet, 1 front loop, double crochet, 6 stitches (sleeve) , yarn, front, yarn, 7 stitches (front) and 3 front stitches (strap). On the wrong side, knit all the loops on the wrong side, except for the stitch loops – knit them face. Further, in all even rows in front of the raglan loops, continue to do crochets. When the length of the raglan is equal to 7 cm, retrieve the loop of the sleeve into pins and knit further, without changing the number of loops, 4 cm. Knit the last 3 rows with facial loops and close all the loops in the 4th row. Retake the hinges of the sleeve from the pin and, knitting 2 cm., Knit 3 rows of facial loops. Close all loops in one row. The second sleeve finish the same. Sew on sleeves.

Tip. If the method of knitting this blouse seemed complicated, then knit a red blouse according to the knitting pattern of a white blouse.

Red shoes

Need yarn “Olga” (50% wool, 50% acrylic) red – about 20 g; set of five knitting needles for circular knitting No. 2; knitting hook.

Both shoes fit the same way. For one boot, type 32 red loops on knitting needles, distribute them into four knitting needles (eight loops each) and, noting the beginning of the first knitting needle, knit 10 rows in a circle. Then divide the work into two parts of 16 loops. Transfer 16 stitches to one knitting needle and knit these stitches on two knitting needles with the front stitch (on the front side knit with the front stitches, on the wrong side with the back stitches). So, knit 7 rows on two knitting needles, then divide all the loops into three parts: five side loops, six central and five more side loops, and begin to form the heel. Knit five side loops on the front side, six central loops, knit the sixth central loop together with the adjacent side loop. Turn the work over and knit on the wrong side. Knit the first side and first central loops together with the wrong side, knit the remaining central loops, knit the last central loop with the wrong ones together with the first side. Knit in this way until all side loops are closed. Six central loops remained on the knitting needles. On the lateral open edges of the heel, dial five loops, distribute the resulting loops into four knitting needles (eight loops) and knit 8 rows of facial loops in a circle. From the 9th row, start decreasing for the toe, knitting two loops together at the beginning of the first and third knitting needles and at the end of the second and fourth knitting needles in each row until one loop remains on the knitting needles. Gather loops on the thread, tighten, pull the end of the thread.

Variegated Pants

Need melange yarn “Varn” (100% acrylic) – 25 g; a set of five knitting needles for circular knitting; 2 matching buttons.

colorful jumpsuit

With a melange thread, put 68 loops on the knitting needles, distribute them into four knitting needles (17 loops each) and, noting the beginning of the first knitting needle, knit 2 rows in an circle with an elastic band (front, wrong). Then, knit the 21 stitches in a circle in a circle and divide the work into two parts of 32 stitches. To distribute 32 loops of the first part into four knitting needles, eight loops each and knit 21 rows in a circle with facial loops, then knit 5 rows with an elastic band. In the 6th row, close all the loops. Distribute the second part of the loops into four knitting needles and tie the second leg in the same way.

Bib trousers fit on two knitting needles. Dial 18 loops and knit the 1st row with the purl stitches. Further, all even rows are knitted with facial loops, odd rows are purl. Having knitted 4 cm, knit 4 rows with facial loops and in the 5th row close all the loops in one row.

Webbing trousers fit equally. Pick up four loops and knit on two knitting needles with a loop of a strip 11 cm long. In the last row, close all the loops. Sew both straps to the back of the trousers and cross them on the back, sew to the corners of the bib. Sew buttons on top.

About kadir

37 queries 0,364